Galaxy power industry limited
Galaxy Power Industry Limited
Add to Cart
Diesel 77kw(103hp) 400mm Bull 4Ton Transmission Line Stringing Equipment
Transmission Line Stringing Equipment
Single Conductor Stringing Equipment is used for overhead single conductor or OPGW stringing.
We supply full set of puller, tensioner, stringing blocks, come along clamps, drum stands etc.
If the conductor diameter is more than 30 mm, or the stringing operation is carried in mountain area,
6 ton hydraulic puller and 4 ton hydraulic tension can be used for pulling long distance transmission lines (6-8 kms)
Transmission Line Stringing Equipment Technicial Parameter :
| Maximum linepull (kN) | 40 |
| Continuous linepull (kN) | 30 |
| Maximum linespeed (km/h) | 5 |
| Bullwheel bottom of groove diameter(mm) | Φ400 |
| Bullwheel grooves number | 7 |
| Maximum suitable steelrope diameter (mm) | Φ16 |
| Maximum through connector diameter (mm) | Φ50 |
| Engine power | Diesel |
| Dimensions (mm) | 3800×2020×2340mm |
| Weight (kg) | 2500 |
| Engine Cummins |
·Hydraulic dynamometer with set-point and automatic control of maximum pull
·Hydraulic oil cooling system
·Control instruments for hydraulic system and diesel engine
·On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1200
·Hydraulic front stabilizer
·Grounding connection point
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided
with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced
to "0") by automatically adjusting the operation speed according to the friction and unexpected loads
which may occur.
·Lighting system for the trailer
·Hydraulic rope clamp for reel change
·Swivel guide rope roller
·Trailer for towing at max speed of 30 km/h
·Extra shaft
·Digital speed and meter counter (extra charge)