GP100 Underground Cable Equipment Yanmar Japan 49.2hp Puller
Performance
- Model: GP100
- Max pull force: 100kN
- Maximum cable diameter:80 mm
- Max speed at Continuous pull: 17m/min
- Pull at max speed: 15kN
- Max speed: 83m/min
- Total weight: 3350kg
- Capstans: 350x650mm
- Continuous pull effort: 80kN
- Overall dimension (length*width*height): 4000*2200*1800mm
Main Configuration
- Engine: Yanmar Japan
- Hydraulic motor: Rexroth German
- Hydraulic pump: Danfoss
- Hydraulic meter: German
- Operating handle: Bondioli & Pavesi Italy
- Hydraulic valve: Sun USA
Engine
- Diesel: Yanmar Japan 49.2hp/36kw
- Cooling system water
- Electrical system 12V
Configuration
- Control panel with instruments for hydraulic system and engine.
- A dynamometer used to check pull values
- Mechanical front and rear stabilizer
- Grounding connection point
- Large channel steel capstan with anti-skid device
- Hydraulic oil cooling system
- In the case of over pull, the preset for maximum tension can stop the puller
- The hydrostatic loop, which allows the puller to continue to change speed in two rotational modes, can operate only one command
- Hydraulic emergency brake operates automatically at the center of the instruction bar or in the case of hydraulic failure (not suitable for lifting)
| Additional Devices |
| Swivel guide rope roller |
| Lighting system for the trailer |
| Digital speed and meter counter (extra charge) |
| Chassis, with damping shaft, tires, traction lever, Trailer for towing at max speed of 30 km/h |
| Accessories for anchoring and lifting |
| The heat exchanger cools the oil in the hydraulic circuit |
| Rear tension roller with hydraulic drive |
