
Add to Cart
Pulling Equipment Diesel 49.2hp/36kw Hydraulic Puller Max pull force 100kN
Hydraulic puller is suitable for laying underground transmission cables and optics fiber cables.
Hydraulic puller is driven by a diesel-hydraulic power unit that is completely enclosed within an area of coverage, limiting noise emissions.
Configuration
Control panel with instruments for hydraulic system and engine.
A dynamometer used to check pull values
Hydraulic oil cooling system
In the case of over pull, the preset for maximum tension can stop the puller
The hydrostatic loop, which allows the puller to continue to change speed in two rotational modes, can operate only one command
Hydraulic emergency brake operates automatically at the center of the instruction bar or in the case of hydraulic failure (not suitable for lifting)
Mechanical front and rear stabilizer
Grounding connection point
Large channel steel capstan with anti-skid device
Model | GP100 |
Max pull force | 100kN |
Continuous pull effort | 80kN |
Max speed at Continuous pull | 17m/min |
Max speed | 83m/min |
Pull at max speed | 15kN |
Capstans | 350x650mm |
Maximum cable diameter | 80 mm |
Total weight | 3350kg |
Overall dimension (length*width*height) | 4000*2200*1800mm |
Diesel | Yanmar Japan 49.2hp/36kw |
Cooling system | Water |
Electrical system | 12V |
Engine | Yanmar Japan |
Hydraulic motor | Rexroth German |
Anti-twist Steel rope
D18mm 700m
We can customize the size and length as your request.
Hydraulic Transmission
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Additional Devices
Lighting system for the trailer
Swivel guide rope roller
Chassis, with damping shaft, tires, traction lever, Trailer for towing at max speed of 30 km/h
Digital speed and meter counter (extra charge)
Accessories for anchoring and lifting
The heat exchanger cools the oil in the hydraulic circuit
Rear tension roller with hydraulic drive