16Ton Bull-Wheel 10 Grooves Hydraulic Puller Overhead Stringing Equipment
16Ton Overhead Stringing Equipment
The hydraulic puller GS160 is used to pull four bundled conductors or 2 bundled conductors for power line construction.
It is fully hydraulic controlled, easily used and maintained
16Ton Overhead Stringing Equipment Features:
- Closed hydraulic circuit,infinitely variable speed control in both rotating directions.
- The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.
- Automatic over pulling protection system
- Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
- Hydraulic oil cooling system.
- Heat treated wear-proof bull wheels
- With rigid axle for towing at high speed, the machine looks beautiful.
- Hydraulic actuated pulling rope clamp for convenient reel change.
- Integral self-loading reel winder with automatic level wind.
16Ton Overhead Stringing Equipment Performance :
Max intermittent pull 160kN Max continuous pull 120kN Speed at max pull 2.5km/h Max speed 5km/h Pull at max speed 60kN |
16Ton Overhead Stringing Equipment Engine :
Diesel 129kw(173hp) Cooling system water Electrical system 24V |
16Ton Overhead Stringing Equipment Characteristics :
Bull-wheel diameter 600mm Groove number 10 Max rope diameter 24mm Max diameter of coupling 100mm Electric system 24V Max diameter of rope reel 1600mm Total weight 5500kg Overall dimension 4300×2300×2550mm |
16Ton Overhead Stringing Equipment Main Configuration :
Engine Cummins Main pump German Rexroth Main motor speed reducer German Rexroth Tail bracket hoisting motor American Eton Hydraulic meter German WIKA Operating handle German Rexroth |
Configuration :
·Hydraulic dynamometer with set-point and automatic control of maximum pull
·Hydraulic oil cooling system
·Control instruments for hydraulic system and diesel engine
·On board reel winder with automatic level wind, suitable for standard reel mod. 1400 and 1600
·Hydraulic front stabilizer
·Grounding connection point
Hydraulic Transmission :
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided
with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced
to "0") by automatically adjusting the operation speed according to the friction and unexpected loads
which may occur.
Additional Devices :
·Lighting system for the trailer
·Hydraulic rope clamp for reel change
·Swivel guide rope roller
·Trailer for towing at max speed of 30 km/h
·Extra shaft
·Digital speed and meter counter (extra charge)
